The innovation introduced by Robe's TETRAgnatha is available to Novelty Spain's lighting inventory.
The TETRA2™ linear bars, utilizing Spiider and Tarrantula technology produce ultra-narrow 4° beams from each of their 18 pixels, resulting in an exceptionally bright and sharp "sheet" of light – a feature much appreciated by lighting designers in the technical audiovisual production of events.
A distinctive feature of the Tetra2™ lies in its ability to create seamless light curtains. Its meticulous design enables the precise placement of multiple Tetra1™ and Tetra2™ units while maintaining consistent pixel spacing.
Its essence is versatility, a great advantage when planning corporate event lighting. Download the full technical specifications here.
[embed]https://vimeo.com/397918030[/embed]
Technical specifications:
- Light source 18x 40 W RGBW
- LED multichips
- Light output 10.500 lm
- Zoom range 4° - 45°
- Effects 2x MCFE™ - Multi-Coloured Flower Effects
Source
- Light source type: 18x 40W RGBW LED multichips
- LED life expectancy: min. 50.000 hours
- Typical lumen maintenance: L70/B50 @ 50.000 hours
Optical system
- Robe’s proprietary optical design
- Zoom range: 4°- 45°
- Highly efficient component optics
- Fixture total lumen output
- 10.500 lm (integrating sphere)
- 8.439 lm (goniophotometer)
Dynamic Effects and Features
- Colour mixing mode RGBW or CMY
- Individual control of each RGBW pixel
- Variable CCT: 2.700K - 8.000K
- Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
- DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
- Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
- 2x MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)
- Motorized zoom
- 2 independent zoom zones
- Pre-programmed random strobe & pulse effects
- Electronic strobe effect with variable speed up to 20 Hz
- High resolution electronic dimming: 0 - 100%
- L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
Control and programming
- Setting & Addressing: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 88 steps), built-in analyser for easy fault finding
- Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
- REAP™ - Robe Ethernet Access Portal
- Wireless CRMX™ technology from Lumen Radio - on request
- DMX Protocol modes: 6
- Control channels: 34, 56, 97, 115, 110, 128
- RGBW / CMY: 8 or 16 bit
- Zoom: 8 or 16 bit
- Dimmer: 8 or 16 bit (internal 18 bit)
Movement
- Tilt movement: 191°
- 16 bit movement resolution
- Controllable speed of PTilt movement
Source: Robe's web page